Appropriate technology and tools are essential to produce first-class products. The following list is an example of the modern technologies which are used to produce SINGING ROCK products.
BMI – the adjusting system
Revolutionary harness size adjusting system by SINGING ROCK. You can easily adjust free end of your waistbelt padding and fix it in the right position and minimize so called “sticking out” of padding. morre >>
Rock&Lock
Patented smart buckle used on SINGING ROCK harnesses and other products enables to lock and open very quickly. more >>
Route 44
SINGING ROCK patented technology for rope production. A rope is produced on a 44-carrier machine which provides great handling, low weight and durability. more >>
Teflon®
Ropes protected with a DuPontTM Teflon® fabric protector have extraordinary water and abrasion resistance. more >>
InterCore
The unique patented technology providing maximum safety even in case of a damaged sheath. The rope is made from 4 layers of parallel core filaments, braided core, braided intermediate sheath made from staple fibres and single tech sheath. picture >>
Single Tech
With the Single Tech system each strand is braided into the sheath separately. Single Tech sheath construction increases the rope’s wear resistance and improves the rope’s mechanical properties, such as flexibility.
Single rope
Marking of single dynamic rope for climbing and mountaineering used in single strand.
Half rope
Marking of half rope for mountaineering, multipitch and ice climbing. Individual strands of rope are used in alternation in the protection system. This system reduces the risk of rope breakage caused by falling stones, and provides maximum safety in alpine conditions and for difficult climbs.
Twin rope
Marking of twin ropes for mountaineering, multipitch and ice climbing. Pairs of the same type of rope are always used, sharing the same protection points. Twin ropes guarantee a high level of safety, especially for multipitch climbing in alpine conditions.
Stitched eye
Selected SINGING ROCK static ropes which are marked with Stitched eye icon are possible to produce with one or two stitched eyes at the end of the rope.
CE – symbol of compliance
The CE symbol declares that the product is in compliance with the safety requirements of the applicable European standard. The number after the symbol CE (e.g. CE 1019) identifies the relevant accredited testing lab.
UIAA
Products marked with this symbol meet strict UIAA safety requirements. The UIAA is the International Mountaineering and Climbing Federation. In most cases, UIAA require-ments are sometimes stricter than EN standards.
UIAA Water repelent
A standard for water repellent ropes approved by the UIAA Safety Commission. To pass the test at a certified laboratory, the amount of absorbed water must not be greater than 5% of the rope’s weight. For comparison, a non-treated rope absorbs around 50% of water in this test, and ropes labelled as “dry” but lacking adequate treatments can absorb between 20% and 40% of water.
Papertrail
Symbol means, that the products are supplemented with a scannable Data Matrix code and all information like serial number, production date, photo, description, instructions etc. are uploaded to a cloud based Papertrail, an all-in-one system for equipment management and maintenance records.