The list of selected EN and US standards for mountaineering and personal protective equipment (PPE) against falls from a height which SINGING ROCK products fullfil.
EN 341
PPE against falls from height
Descender devices for rescue
EN 353-1, 2
PPE against falls from a height
Guided type fall arresters

EN 354
PPE against falls from a height
Connecting equipment max. length 2 m (incl. connectors)

EN 355
PPE against falls from a height
Energy absorbers
EN 358
PPE for work positoning and prevention of falls from a height
Work positioning systems
EN 360
PPE against falls from a height
Retractable type fall arresters
Retractable type fall arresters

EN 361
PPE against falls from a height
Full body harnesses
Full body harnesses

EN 362
PPE against falls from a height
Connectors

EN 388
Protection gloves against mechanical risks

EN 397
PPE against falls from a height
Industrial safety helmets
Industrial safety helmets

EN 564
Mountaineering equipment
Accessory cords

EN 566
Mountaineering equipment
Slings
Slings

EN 567
Mountaineering equipment
Rope clamps
Rope clamps

EN 795, EN 795/A1
PPE against falls from a height
Anchor devices
Anchor devices

EN 813
PPE against falls from a height
Sit harnesses

EN 892
Mountaineering equipment
Dynamic (strech) ropes

EN 959
Mountaineering equipment
Rock anchors
Rock anchors

EN 1496
Rescue equipment
Rescue lifting devices
Rescue lifting devices

EN 1497
Rescue equipment
Rescue harnesses

EN 1498
Personal fall protection equipment
Rescue loops

EN 1808
Safety requirements for suspended access equipment

EN 1891
PPE against falls from a height
Low stretch kernmantel ropes
Low stretch kernmantel ropes

EN 12275
Mountaineering equipment
Connectors
Connectors

EN 12277
Mountaineering equipment
Harnesses
Harnesses

EN 12278
Mountaineering equipment
Pulleys
Pulleys

EN 12492
Mountaineering equipment
Helmets for mountaineers

EN 12841
PPE against falls from a height
Descender device for rope access system and rope adjustment devices

EN 15151
Mountaineering equipment
Braking devices
Braking devices

ANSI Z359.1
Safety Requirements for Personal Fall Arrest Systems, Subsystems and Components

CEN/TS 16415
Recommendations for anchor devices for use by more than one person simultaneously

NfPA Class II
Defined by NFPA 1983 as being designed to fit around the waist and thighs or under the buttocks and may be utilized for a maximum of a two–person load

NfPA Class III
Defined by NFPA 1983 as being designed to fit around the waist and thighs or under the buttocks and over both shoulders, rated for as maximum of a two–person load and is designed to prevent inverting
SINGING ROCK OFFICIAL WEB.